There is no excerpt because this is a protected post.
PCAMS
Pipe Crawling Activity Measurement System
3D-Printed Cannula
3D-Printed Cannula Supervised development and testing of a unique 3D-printed FR6 drainage cannula with extra drainage holes, bimaterial reinforcement, and tapered end with open lumen. None of these features were available on any 6Fr cannula.. Published Abstract: https://asaio.org/conference/Program/2024/BIO21.cgi Extracorporeal life…
3D-Printing Artificial Lungs
Make your battery pack using your own 18650s or laptop batteries. There are built-in tabs so do you not need to do your own soldering like other DIY battery packs, just put in the 18650s and you’re good to go.…
X-Cap DFM Optimization
Visionary Machines LLC needed their x-cap (used to hold corrugated plastic boards together) mass-manufactured at varying quantities. I was brought on to modify their component to be mass-manufactured.
Protected: High-Current ESC
There is no excerpt because this is a protected post.
Automated R2R Manufacturing of Microfluidic Artificial Lungs
A roll-to-roll system to manufacture rolled microfluidic artificial lungs. These are the first microfluidic artificial lungs that were manufactured using an automated system. The roll-to-roll system incorporates a heavily-modified laser engraver, and two actuated cold-plasma nozzles. Published Paper: https://pubs.rsc.org/en/content/articlelanding/2024/lc/d4lc00339j Published…
3D-Printed Microfluidic Artificial Lungs
3D-Printed Microfluidic Artificial Lungs Designed and manufactured various 3D-printed microfluidic artificial lungs. Published Abstract: https://asaio.org/conference/program/2023/P44.cgi Purpose: Current hollow-fiber oxygenators used in Extracorporeal Membrane Oxygenation have suboptimal gas exchange performance and hemocompatibility. Microfluidic artificial lungs (µALs) promise smaller feature sizes, improving…
Platypus Sensor Pod and Winch
The Platypus 3D Measurement System was developed in co-operation with Spencer Krause and Associates, by request of Platypus LLC. In early 2017, I was brought into the development team of the Platypus Winch System to solve critical weight management and electrical issues. The Platypus 3D Measurement…
Wifi Relay
This Wifi Module was built on behalf of Spencer Krause and Associates. This is a plug and play WiFi communications module. Place it on top of an arduino, and it will automatically transmit serial data via WiFi to the cloud where…